eduroam-TH monitoring system and community documents

From eduroam-TH document
Revision as of 14:02, 7 November 2019 by Admin (talk | contribs)

eduroam-TH SP Monitoring

Features

  • Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
  • DeepSleep mode
  • Boot to reset configuration
  • Automatic upgrade firmware via OTA (Over The Air)

Versions

  • 0.30-2019103100

List of supported ESP32 boards

M5Stick_C

M5StickC ESP32-PICO Mini IoT Development Kit

  • ESP32-based (ESP32-PICO)
  • 5V DC power supply
  • USB Type-C
  • 4 MByte Flash + 520K RAM
  • 2 Buttons, LCD(0.96 inch), 1 Reset
  • 2.4G Antenna: Proant 440
  • 80 mAh Lipo Battery
  • Development Platform UIFlow, MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for M5Stick_C

WEMOS LOLIN32

Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)

  • ESP32-based (ESP-WROOM-32)
  • 5V DC power supply
  • USB Micro
  • 240MHz equipped with 4MB flash memory + 520K RAM
  • 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
  • 2.4G Antenna max sensitivity reception: -97 dBm
  • Development Platform MicroPython, Arduino

How to flash eduroam-TH SP monitor firmware for WEMOS LOLIN32

Heltect WIFI Kit 32

How to flash eduroam-TH SP monitor firmware for Heltect WIFI Kit 32

DOIT ESP32 DEVKIT V1

How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1

WEMOS WiFi & Bluetooth Battery ESP32

How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32