Difference between revisions of "Sp-monitor"

From eduroam-TH document
m
m
Line 74: Line 74:
  
 
=== DOIT ESP32 DEVKIT V1 ===
 
=== DOIT ESP32 DEVKIT V1 ===
 +
'''DOIT ESP32 DEVKIT V1'''
 +
 +
* ESP32-based (ESP-WROOM-32 240MHz)
 +
* USB Micro, CP2102 USB to UART bridge
 +
* 4MB SPI flash memory + 520K RAM
 +
* 1 Button, 1 Reset
 +
* 2.4G Antenna
 +
* 5V DC power supply
 +
* Development platform: MicroPython, Arduino
  
 
'''Where to buy'''
 
'''Where to buy'''

Revision as of 14:43, 7 November 2019

eduroam-TH SP Monitoring

Features

  • Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
  • DeepSleep mode
  • Boot to reset configuration
  • Automatic upgrade firmware via OTA (Over The Air)

Versions

  • 0.30-2019103100

List of supported ESP32 boards

M5Stick_C

M5StickC ESP32-PICO Mini IoT Development Kit

  • ESP32-based (ESP32-PICO)
  • USB Type-C
  • 4 MByte Flash + 520K RAM
  • 2 Buttons, LCD(0.96 inch), 1 Reset
  • 2.4G Antenna: Proant 440
  • 5V DC power supply
  • 80 mAh Lipo Battery
  • Development Platform UIFlow, MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for M5Stick_C

WEMOS LOLIN32

Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)

  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
  • 2.4G Antenna max sensitivity reception: -97 dBm
  • 5V DC power supply
  • Development Platform MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for WEMOS LOLIN32

Heltec WIFI Kit 32

Heltec WIFI Kit 32

  • ESP32-based (240MHz Tensilica LX6 dual-core)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 0.96 inch 128*64 OLED display, 1 Reset
  • 2.4G PCB Antenna
  • 5V DC power supply
  • Battery Type: 3.7V Lithium (SH1.25 x 2 sockets)
  • Development Platform MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for Heltec WIFI Kit 32

DOIT ESP32 DEVKIT V1

DOIT ESP32 DEVKIT V1

  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 1 Reset
  • 2.4G Antenna
  • 5V DC power supply
  • Development platform: MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1

WEMOS WiFi & Bluetooth Battery ESP32

WEMOS WiFi & Bluetooth Battery ESP32

  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 1 Reset
  • 2.4G Antenna
  • 5V DC power supply
  • 18650 charging system integrated
  • Development platform: MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32