Difference between revisions of "Sp-monitor"
From eduroam-TH document
m |
|||
| Line 23: | Line 23: | ||
=== M5Stick_C === | === M5Stick_C === | ||
'''[https://m5stack.com/products/stick-c M5StickC ESP32-PICO Mini IoT Development Kit]''' | '''[https://m5stack.com/products/stick-c M5StickC ESP32-PICO Mini IoT Development Kit]''' | ||
| − | + | [[File:M5StickC-01-300px.png|right|300px|M5StickC]] | |
* ESP32-based (ESP32-PICO) | * ESP32-based (ESP32-PICO) | ||
* USB Type-C | * USB Type-C | ||
Revision as of 21:59, 7 November 2019
Features
- Check the service status of SP even without guests
- Connect to eduroam SP using an account from eduroam-TH
- Reconnect every 30 minutes
- Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
- Supports DeepSleep mode
- Boot to reset the configuration
- Automatic firmware upgrade via OTA (Over The Air)
Versions
- 0.30-2019103100
List of supported ESP32 boards
M5Stick_C
M5StickC ESP32-PICO Mini IoT Development Kit
- ESP32-based (ESP32-PICO)
- USB Type-C
- 4 MByte Flash + 520K RAM
- 2 Buttons, LCD(0.96 inch), 1 Reset
- 2.4G Antenna: Proant 440
- 5V DC power supply
- 80 mAh Lipo Battery
- Development Platform UIFlow, MicroPython, Arduino
Where to buy
- ฿396, M5Stickc Esp32 Pico Mini Iot Development Board Finger Computer With A Color Lcd Display
- ฿399, M5Stack M5StickC ESP32 PICO Color LCD มินิ IoT บอร์ดโมดูล สำหรับ Arduino
How to flash eduroam-TH SP monitor firmware for M5Stick_C
WEMOS LOLIN32
Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)
- ESP32-based (ESP-WROOM-32 240MHz)
- USB Micro, CP2102 USB to UART bridge
- 4MB SPI flash memory + 520K RAM
- 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
- 2.4G Antenna max sensitivity reception: -97 dBm
- 5V DC power supply
- Development Platform MicroPython, Arduino
Where to buy
- ฿380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED
- ฿470, บอร์ดพัฒนา IoT พร้อมจอ OLED Wemos® Lolin32 ESP32 + OLED WiFi+Bluetooth
How to flash eduroam-TH SP monitor firmware for WEMOS LOLIN32
Heltec WIFI Kit 32
- ESP32-based (240MHz Tensilica LX6 dual-core)
- USB Micro, CP2102 USB to UART bridge
- 4MB SPI flash memory + 520K RAM
- 1 Button, 0.96 inch 128*64 OLED display, 1 Reset
- 2.4G PCB Antenna
- 5V DC power supply
- Battery Type: 3.7V Lithium (SH1.25 x 2 sockets)
- Development Platform MicroPython, Arduino
Where to buy
- ฿580, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว
- ฿609, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว
How to flash eduroam-TH SP monitor firmware for Heltec WIFI Kit 32
DOIT ESP32 DEVKIT V1
DOIT ESP32 DEVKIT V1
- ESP32-based (ESP-WROOM-32 240MHz)
- USB Micro, CP2102 USB to UART bridge
- 4MB SPI flash memory + 520K RAM
- 1 Button, 1 Reset
- 2.4G Antenna
- 5V DC power supply
- Development platform: MicroPython, Arduino
Where to buy
- ฿240, DOIT ESP32 DevKit V1 Development Board WiFi + Bluetooth
- ฿300, ESP32 DOIT ESP32 DEVKIT V1 ESP-32S NodeMCU ESP-WROOM-32 Wi-Fi and Bluetooth Dual Core ESP-32 ESP-32S ESP 32
How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1
WEMOS WiFi & Bluetooth Battery ESP32
WEMOS WiFi & Bluetooth Battery ESP32
- ESP32-based (ESP-WROOM-32 240MHz)
- USB Micro, CP2102 USB to UART bridge
- 4MB SPI flash memory + 520K RAM
- 1 Button, 1 Reset
- 2.4G Antenna
- 5V DC power supply
- 18650 charging system integrated
- Development platform: MicroPython, Arduino
Where to buy
- ฿530, บอร์ดพัฒนา IoT พร้อมลังถ่านใส่แบต Li-ion 18650 WeMos ESP32 WiFi+Bluetooth
- ฿540, WeMos ESP32 ESP-WROOM-32 + 18650 Battery Socket บอร์ด ESP32 รุ่น ESP-WROOM-32 พร้อมที่ใส่แบตเตอร์รี่ 18650 และวงจรชาร์จในตัว
How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32
