Difference between revisions of "Sp-monitor"

From eduroam-TH document
(Created page with "{{DISPLAYTITLE:eduroam-TH monitoring system and community documents}} {{#seo: |title=eduroam-TH document: SP Monitoring |titlemode=append |keywords=eduroam,eduroam-TH,monitori...")
 
m
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
{{DISPLAYTITLE:eduroam-TH monitoring system and community documents}}
+
{{DISPLAYTITLE:eduroam-TH SP Monitoring}}
 
{{#seo:
 
{{#seo:
−
|title=eduroam-TH document: SP Monitoring
+
|title=eduroam-TH documents: SP Monitoring
 
|titlemode=append
 
|titlemode=append
 
|keywords=eduroam,eduroam-TH,monitoring,document
 
|keywords=eduroam,eduroam-TH,monitoring,document
−
|description=eduroam-TH monitoring system and community documents
+
|description=eduroam-TH monitoring system and community documents: SP Monitoring
 
}}__NOTOC__
 
}}__NOTOC__
−
 
−
== SP Monitoring ==
 
  
 
== Features ==
 
== Features ==
 +
* Check the service status of SP even without guests
 +
* Connect to eduroam SP using an account from eduroam-TH monitoring system (eduroam@eduroam-mon.uni.net.th)
 +
* Reconnect every 30 minutes
 
* Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
 
* Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
−
* DeepSleep mode
+
* Supports DeepSleep mode
−
* Boot to reset configuration
+
* Boot to reset the configuration
−
* Automatic upgrade firmware via OTA (Over The Air)
+
* Automatic firmware upgrade via OTA (Over The Air)
  
 
== Versions ==
 
== Versions ==
Line 21: Line 22:
  
 
=== M5Stick_C ===
 
=== M5Stick_C ===
−
'''M5StickC ESP32-PICO Mini IoT Development Kit''' [https://m5stack.com/products/stick-c]
+
'''[https://m5stack.com/products/stick-c M5StickC ESP32-PICO Mini IoT Development Kit]'''
−
 
+
[[File:M5StickC-01-300px.png|right|300px|M5StickC]]
−
'''Product Features'''
+
* ESP32-based (ESP32-PICO)
−
* ESP32-based
 
−
* 5V DC power supply
 
 
* USB Type-C
 
* USB Type-C
 
* 4 MByte Flash + 520K RAM
 
* 4 MByte Flash + 520K RAM
 
* 2 Buttons, LCD(0.96 inch), 1 Reset
 
* 2 Buttons, LCD(0.96 inch), 1 Reset
 
* 2.4G Antenna: Proant 440
 
* 2.4G Antenna: Proant 440
 +
* 5V DC power supply
 
* 80 mAh Lipo Battery
 
* 80 mAh Lipo Battery
 
* Development Platform UIFlow, MicroPython, Arduino
 
* Development Platform UIFlow, MicroPython, Arduino
  
−
'''[[sp-monitor-m5stick_c| How to flash eduroam-TH SP monitor firmware for M5Stick_C]]'''
+
'''Where to buy'''
 +
* [https://www.lazada.co.th/products/m5stickc-esp32-pico-mini-iot-development-board-finger-computer-with-a-color-lcd-display-i367140126-s717288358.html ฿396, M5Stickc Esp32 Pico Mini Iot Development Board Finger Computer With A Color Lcd Display]
 +
* [https://shopee.co.th/-%E0%B8%AA%E0%B9%88%E0%B8%87%E0%B8%9F%E0%B8%A3%E0%B8%B5-M5Stack-M5StickC-ESP32-PICO-Color-LCD-%E0%B8%A1%E0%B8%B4%E0%B8%99%E0%B8%B4-IoT-%E0%B8%84%E0%B8%93%E0%B8%B0%E0%B8%81%E0%B8%A3%E0%B8%A3%E0%B8%A1%E0%B8%81%E0%B8%B2%E0%B8%A3%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2%E0%B8%81%E0%B8%B2%E0%B8%A3%E0%B8%84%E0%B8%AD%E0%B8%A1%E0%B8%9E%E0%B8%B4%E0%B8%A7%E0%B9%80%E0%B8%95%E0%B8%AD%E0%B8%A3%E0%B9%8C-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B9%82%E0%B8%A1%E0%B8%94%E0%B8%B9%E0%B8%A5-%E0%B8%AA%E0%B8%B3%E0%B8%AB%E0%B8%A3%E0%B8%B1%E0%B8%9A-Arduino-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94-i.64903522.2636407030 ฿399, M5Stack M5StickC ESP32 PICO Color LCD มินิ IoT บอร์ดโมดูล สำหรับ Arduino]
 +
 
 +
'''[https://www.rmuti.ac.th/user/prakai/w/SP_Monitor_M5Stick_C How to flash eduroam-TH SP monitor firmware for M5Stick_C]'''
  
 
=== WEMOS LOLIN32 ===
 
=== WEMOS LOLIN32 ===
−
* [[sp-monitor-lolin32| How to flash firmware for WEMOS LOLIN32]]
+
'''[https://github.com/FablabTorino/AUG-Torino/wiki/Wemos-Lolin-board-(ESP32-with-128x64-SSD1306-I2C-OLED-display)| Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)]'''
  
−
=== Heltect WIFI Kit 32 ===
+
[[File:Lolin32-300px.png|right|300px|WEMOS LOLIN32]]
−
* [[sp-monitor-heltec_wifi_kit_32| How to flash firmware for Heltect WIFI Kit 32]]
+
 
 +
* ESP32-based (ESP-WROOM-32 240MHz)
 +
* USB Micro, CP2102 USB to UART bridge
 +
* 4MB SPI flash memory + 520K RAM
 +
* 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
 +
* 2.4G Antenna max sensitivity reception: -97 dBm
 +
* 5V DC power supply
 +
* Development Platform MicroPython, Arduino
 +
 
 +
'''Where to buy'''
 +
* [https://www.ioxhop.com/product/608/esp32-oled-128x64-on-one-board ฿380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED]
 +
* [https://www.mosfex.com/product/67/%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2-iot-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%88%E0%B8%AD-oled-wemos%C2%AE-lolin32-esp32-oled-wifibluetooth ฿470, บอร์ดพัฒนา IoT พร้อมจอ OLED Wemos® Lolin32 ESP32 + OLED WiFi+Bluetooth]
 +
 
 +
'''[http://www.rmuti.ac.th/user/prakai/w/SP_Monitor_LOLIN32 How to flash eduroam-TH SP monitor firmware for WEMOS LOLIN32]'''
 +
 
 +
=== Heltec WIFI Kit 32 ===
 +
'''[https://heltec.org/project/wifi-kit-32 Heltec WIFI Kit 32]'''
 +
 
 +
[[File:Heltec wifi kit 32-300px.png|right|300px|Heltec WIFI Kit 32]]
 +
 
 +
* ESP32-based (240MHz Tensilica LX6 dual-core)
 +
* USB Micro, CP2102 USB to UART bridge
 +
* 4MB SPI flash memory + 520K RAM
 +
* 1 Button, 0.96 inch 128*64 OLED display, 1 Reset
 +
* 2.4G PCB Antenna
 +
* 5V DC power supply
 +
* Battery Type: 3.7V Lithium (SH1.25 x 2 sockets)
 +
* Development Platform MicroPython, Arduino
 +
 
 +
'''Where to buy'''
 +
* [https://www.arduino4.com/product/696/heltec-esp32-oled-nodemcu-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%88%E0%B8%AD-oled-%E0%B8%82%E0%B8%99%E0%B8%B2%E0%B8%94-0-96-%E0%B8%99%E0%B8%B4%E0%B9%89%E0%B8%A7 ฿580, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว]
 +
* [https://www.lazada.co.th/products/heltec-esp32-oled-nodemcu-oled-096-i328076037-s627949000.html ฿609, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว]
 +
 
 +
'''[http://www.rmuti.ac.th/user/prakai/w/SP_Monitor_Heltec_WIFI_Kit_32 How to flash eduroam-TH SP monitor firmware for Heltec WIFI Kit 32]'''
  
 
=== DOIT ESP32 DEVKIT V1 ===
 
=== DOIT ESP32 DEVKIT V1 ===
−
* [[sp-monitor-doitESP32devkitV1| How to flash firmware for DOIT ESP32 DEVKIT V1]]
+
'''DOIT ESP32 DEVKIT V1'''
 +
 
 +
[[File:DoitESP32devkitV1-300px.png|right|300px|DOIT ESP32 DEVKIT V1]]
 +
 
 +
* ESP32-based (ESP-WROOM-32 240MHz)
 +
* USB Micro, CP2102 USB to UART bridge
 +
* 4MB SPI flash memory + 520K RAM
 +
* 1 Button, 1 Reset
 +
* 2.4G Antenna
 +
* 5V DC power supply
 +
* Development platform: MicroPython, Arduino
 +
 
 +
'''Where to buy'''
 +
* [http://www.robotsiam.com/product/119/doit-esp32-devkit-v1-development-board-wifi-bluetooth ฿240, DOIT ESP32 DevKit V1 Development Board WiFi + Bluetooth]
 +
* [https://www.arduinoall.com/product/1465/esp32-doit-esp32-devkit-v1-esp-32s-nodemcu-esp-wroom-32-wi-fi-and-bluetooth-dual-core-esp-32-esp-32s ฿300, ESP32 DOIT ESP32 DEVKIT V1 ESP-32S NodeMCU ESP-WROOM-32 Wi-Fi and Bluetooth Dual Core ESP-32 ESP-32S ESP 32]
 +
 
 +
'''[http://www.rmuti.ac.th/user/prakai/w/SP_Monitor_doitESP32devkitV1 How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1]'''
  
 
=== WEMOS WiFi & Bluetooth Battery ESP32 ===
 
=== WEMOS WiFi & Bluetooth Battery ESP32 ===
−
* [[sp-monitor-pocket_32| How to flash firmware for WEMOS WiFi & Bluetooth Battery ESP32]]
+
'''WEMOS WiFi & Bluetooth Battery ESP32'''
 +
 
 +
[[File:Pocket 32-300px.png|right|300px|WEMOS WiFi & Bluetooth Battery ESP32]]
 +
 
 +
* ESP32-based (ESP-WROOM-32 240MHz)
 +
* USB Micro, CP2102 USB to UART bridge
 +
* 4MB SPI flash memory + 520K RAM
 +
* 1 Button, 1 Reset
 +
* 2.4G Antenna
 +
* 5V DC power supply
 +
* 18650 charging system integrated
 +
* Development platform: MicroPython, Arduino
 +
 
 +
'''Where to buy'''
 +
* [https://www.mosfex.com/product/66/%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2-iot-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%A5%E0%B8%B1%E0%B8%87%E0%B8%96%E0%B9%88%E0%B8%B2%E0%B8%99%E0%B9%83%E0%B8%AA%E0%B9%88%E0%B9%81%E0%B8%9A%E0%B8%95-li-ion-18650-wemos-esp32-wifibluetooth ฿530, บอร์ดพัฒนา IoT พร้อมลังถ่านใส่แบต Li-ion 18650 WeMos ESP32 WiFi+Bluetooth]
 +
* [https://www.arduinoall.com/product/1779/wemos-esp32-esp-wroom-32-18650-battery-socket-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94-esp32-%E0%B8%A3%E0%B8%B8%E0%B9%88%E0%B8%99-esp-wroom-32-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%97%E0%B8%B5%E0%B9%88%E0%B9%83%E0%B8%AA%E0%B9%88%E0%B9%81%E0%B8%9A%E0%B8%95%E0%B9%80%E0%B8%95%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%A3%E0%B8%B5%E0%B9%88-1 ฿540, WeMos ESP32 ESP-WROOM-32 + 18650 Battery Socket บอร์ด ESP32 รุ่น ESP-WROOM-32 พร้อมที่ใส่แบตเตอร์รี่ 18650 และวงจรชาร์จในตัว]
 +
 
 +
'''[http://www.rmuti.ac.th/user/prakai/w/SP_Monitor_Pocket_32 How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32]'''

Latest revision as of 15:33, 8 November 2019

Features

  • Check the service status of SP even without guests
  • Connect to eduroam SP using an account from eduroam-TH monitoring system (eduroam@eduroam-mon.uni.net.th)
  • Reconnect every 30 minutes
  • Report connection information to eduroam-TH monitoring system: SSID, BSSID, RSSI, CHannel, IP Address, and MAC Address
  • Supports DeepSleep mode
  • Boot to reset the configuration
  • Automatic firmware upgrade via OTA (Over The Air)

Versions

  • 0.30-2019103100

List of supported ESP32 boards

M5Stick_C

M5StickC ESP32-PICO Mini IoT Development Kit

M5StickC
  • ESP32-based (ESP32-PICO)
  • USB Type-C
  • 4 MByte Flash + 520K RAM
  • 2 Buttons, LCD(0.96 inch), 1 Reset
  • 2.4G Antenna: Proant 440
  • 5V DC power supply
  • 80 mAh Lipo Battery
  • Development Platform UIFlow, MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for M5Stick_C

WEMOS LOLIN32

Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)

WEMOS LOLIN32
  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
  • 2.4G Antenna max sensitivity reception: -97 dBm
  • 5V DC power supply
  • Development Platform MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for WEMOS LOLIN32

Heltec WIFI Kit 32

Heltec WIFI Kit 32

Heltec WIFI Kit 32
  • ESP32-based (240MHz Tensilica LX6 dual-core)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 0.96 inch 128*64 OLED display, 1 Reset
  • 2.4G PCB Antenna
  • 5V DC power supply
  • Battery Type: 3.7V Lithium (SH1.25 x 2 sockets)
  • Development Platform MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for Heltec WIFI Kit 32

DOIT ESP32 DEVKIT V1

DOIT ESP32 DEVKIT V1

DOIT ESP32 DEVKIT V1
  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 1 Reset
  • 2.4G Antenna
  • 5V DC power supply
  • Development platform: MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1

WEMOS WiFi & Bluetooth Battery ESP32

WEMOS WiFi & Bluetooth Battery ESP32

WEMOS WiFi & Bluetooth Battery ESP32
  • ESP32-based (ESP-WROOM-32 240MHz)
  • USB Micro, CP2102 USB to UART bridge
  • 4MB SPI flash memory + 520K RAM
  • 1 Button, 1 Reset
  • 2.4G Antenna
  • 5V DC power supply
  • 18650 charging system integrated
  • Development platform: MicroPython, Arduino

Where to buy

How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32

Retrieved from "https://eduroam-mon.uni.net.th/doc/index.php?title=Sp-monitor&oldid=27"
Creative Commons Attribution-NonCommercial-ShareAlike
Powered by MediaWiki